The Traditional
Craft of Yakisugi
Charred Japanese Cedar
The Centuries-Old Timber Treatment That Still Outperforms Modern Methods
Traditional Yakisugi is the Japanese method of charring the surface of sugi (Japanese cedar) to preserve it against weather, insects, and decay.
Japanese cedar grows abundantly in well managed plantation forests across Japan. Sugi’s straight grain and even texture allows it to burn uniformly, creating a stable, protective carbon layer that resists moisture, insects, and decay.
True Yakisugi can only be created using Japanese cedar
Perfected by the Japanese in the 16th century. The words Yaki Sugi derives from the words “Yake” meaning burnt and “Sugi” meaning Japanese cedar.
Only sugi has the qualities that the charred timber requires – a strong, straight grained, fast drying softwood rich in tannin. Its the tannins that react with heat forming a dense layer of carbon thats resistant to fungal decay, insects and microbial attack. It’s responsible for the unmistakable aroma of true yakisugi.
No added chemicals required. Proven natural durability
Yakisugi can be seen across Japan, with buildings in Saga Toriimoto, near Kyoto, still retaining original charred timber over 400 years old. The technique uses only fire and the wood’s natural chemistry to form a stable, long-lasting barrier that improves with age, developing a rich, weathered patina.
This centuries-old method proves that wood can endure outdoors for generations without maintenance or added chemicals, offering sustainable, low-impact longevity that modern architects continue to value.
How it works
The structure of Japanese cedar is made up of a lattice of material called Lignin with a soft cellulose material inside. Lignin is a natural polymer which is resistant to rot and indigestible to insects while the cellulose inside is a sugar, both digestible for bugs and susceptible to rotting.
When the timber is subjected to the intense heat the soft cellulose matter is burned away, leaving behind the hard lignin exposed to the surface. It’s this hard layer that creates a superior wear surface less prone to deterioration from fungal attack and is not so tasty for wood loving insects.
The intense heat treatment also makes the planks more dimensionally stable, with the soot layer improving fire retardancy, while also adding a layer of hydrophobic protection against the weather.
Traditionally
Maintenance Optional
In Japan, the patina that develops on Yakisugi over the years is highly valued for its beauty.
If left to the elements the soot layer wears away after 30-50 years depending on environmental factors but the heat treated timber will continue to weather for well over 100 years with examples near Kyoto nearly 400 years old.
While traditionally a maintenance optional exterior cladding. Yakisugi can also be re-oiled periodically to maintain the original colour and slow down the weathering process.
We recommend re-oiling as required with our Dento finish being the lowest maintenance option and the Makkuro + Wabi Sabi requiring more regular maintenance as per product guidelines.
Our Yakisugi Finishes
Our Dento finish is Japanese cedar heat treated and charred then coated with natural oil.
The thick layer of carbon gives the timber longevity, UV and weather protection, as well as fire resistance.
Natural oil solidifies the carbon layer, minimising blemishes and prolonging the finish by preventing fine layers of soot from coming off.
Traditionally a maintenance optional finish, we recommend re-oiling every 10-20 years to prolong the layer of black carbon.
Our Makurro finish is Japanese cedar heat treated and charred then lightly brushed before being factory coated using natural oil to protect and prolong the natural colour of the timber.
The light brush leaves behind a smooth, lightly burned appearance that gains character with age. In Japan, the patina that develops over the years is valued for its beauty.
If you want to prolong the original colour of the timber, oil-coating every 5-10 years is recommended.
Japanese cedar heat treated and charred then brushed twice removing most of the char from the softwood and leaving carbon only on the fine hardwood grain.
Once the softwood is exposed it readily accepts natural colour oils before we do a final factory coat to seal.
With every board finished by hand, the final result is a truly beautiful cladding with an enhanced timber grain set against a range of natural colours.
Available in a range of natural oil colours.
Wabi Sabi Colour Range